Slut i lager
Meddela mig när varan finns i lager igen.
●Matchning av mottagare
●Uppspelning av ljudfiler för mätvärden, Alarm, Inställningar etc.
●Real-tidsloggning av Fligght Data
●Antalet strömbrytare kan utökas
●Indikering av mottagarens signalstyrka (RSSI) Alerts
●Supersnabb – minimal fördröjning
●Stödjer Smart Port
|Kompabil med||FrSky X series, D series och V8-II serie mottagare (plus andra mottagare om extern modul används|
|Drivspänning||6~15V (2S, 3S Lipos kan användas)|
|Förbrukning||Max 260 mA om både RF-modul och bakgrundsljus är påslaget|
|Antal kanaler||16 kanaler utbyggbart till 32|
Lite av nyheterna i Taranis E:
The most important aspect for any transmitter is maintaining a rock solid connection with the receiver. FrSky is well known for the frequency hopping ACCST technology taking advantage of the entire 2.4GHz band resulting in excellent range and reliability. FrSky knows many things can affect the connection between Transmitter and receiver so RSSI (receiver signal strength indication) is incorporated into all telemetry receivers. The Taranis transmitter is continually monitoring the reception quality at the aircraft. The Taranis will alert the pilot before signal quality becomes critical. This saves planes and makes the hobby much safer!
In addition to RSSI, the Taranis has other safety features. Receiver Lock allows you to lock a specific model in the transmitter to one and only one receiver. No more flying (crashing) with the wrong program selected. Taranis has three different types of Failsafe.
1 – Hold last known commands,
2- Goto a programmed state (cut throttle, flaps down, etc.
3- No output. (Triggers flight controllers with ”go home” feature.)
The RSSI feature means you probably won’t ever use the failsafe.
Just like having a copilot, the transmitter will give you voice alerts on speaker or through the headphone jack. Count down timers, low voltage warnings, landing gear down, thermal mode entered, etc. can all be set up with human recorded voice of your creation, or sound packages shared online from other hobbyists.
The open-source software for the Taranis has been developed by hobbyist’s in the R/C community. The programmers of the transmitter’s firmware and companion software which runs on Linux, Windows, and Macintosh are very receptive to input and requests from users. There are no limitations based on marketing decisions. If you can think of it, chances are the Taranis is capable of doing it.
With 60 model memories, tons of mixes, 9 flight modes, sequencing, servo speed, programmed delay all kinds of triggers, and the ability to assign any channel to anything, it is hard to come up with something this radio can’t do. With this level of complexity, you would think the programming would be a real nightmare, but thanks to the forward thinking of the open source community, we can set up and test our programs on our favorite computer (PC, Mac or Ubuntu), it even features a handy set up wizard that will take care of most of the work! But they also made it easy to share programs freely via the USB port, or micro SD card on the back of the Taranis.
Are you heavily invested in another RF system? No worries, the Taranis E actually has a normal JR style module built inside that will accept modules for other transmitting protocols. In the model setup you simply tell the system if you are using the module bay, and shut down the internal FrSky module. Now you can use your Futaba, Spektrum, JR, and other receivers if you have a transmitter module that fits in a JR style module bay. (Note, you will need to remove the antenna from the module and screw on an antenna pigtail to mount the module entenna outside of the radio case.
FrSky has taken the hobby to a whole new level as they have evolved the transmitter to be more than a steering wheel. This is something truly special!
Taranis X9E levereras med följande:
|Dimensioner||34 × 29 × 12 cm|