RC Till bra priser
210.00 kr
FrSky FLVS-01 är en mätsensor för upp till sex LiPoceller
2 i lager
Beskrivning
Här är 2,4 GHz systemet som får alla andra system att slänga sig i väggen!
FrSky har den senaste tekniken och skiftar frekvens 100 gånger i sekunden! Och den skiftar bland 2,4 GHz-bandets samtliga 80 kanaler!
1. Specifications:
Model: FLVS-01
Dimension: 45*21*7mm
Weight: 5.2g
Measurement range: 1S~6S (The first lipo voltage should be more than 3.55V)
Cell voltage display range: 0.20~4.20V
Voltage display resolution: 0.01V
Voltage detection precision: 0.05V
Current of the board: 15.5mA
Operating temperature range: -30℃~70℃
Pixel: 128*64 with OLED display screen
2. Set Up
2.1 FrSky Lipo Voltage Sensor can be used as a lipo voltage detector. OLED screen displays total voltage and cell voltages as connected.
2.2 Two FrSky Lipo Voltage Sensors can be combined to detect at most 12S.
2.2.1 How to detect and display 1S~6S
2.2.2 How to detect and display at most 12S
2.3 Connect “Data Out” port of FrSky Lipo Voltage Sensor to sensor hub by provided cable, Data Screen-3 of FLD-02 and/or DHT-U display total voltage and cell voltages as connected. (see﹡Note below)
﹡Note:
When FLVS-01 works with sensor hub and FLD-02/DHT-U to display total voltage and cell voltages as connected, please refer to below points:
1, Upgrade sensor hub to version2.0
Driver for XP/ Win7 Vista:http://www.frsky-rc.com/download.asp?id=22
FSH-01 Upgrade ROM_V2.0: http://www.frsky-rc.com/download.asp?id=22
How-to_sensor hub upgrade: http://www.frsky-rc.com/download.asp?id=22
2, Upgrade DHT-U to version2.0
Driver for XP/ Win7 Vista: http://www.frsky-rc.com/download.asp?id=22
DHT-U Upgrade ROM_V2.0: http://www.frsky-rc.com/download.asp?id=23
How-to_DHT-U upgrade: http://www.frsky-rc.com/download.asp?id=23
3, Current FLD-02 displays 6S at most. If 12S display is required, new firmware will be required.
Mer information
| Vikt | 0.0500 kg |
|---|
Lämna ett svar
Du måste vara inloggad för att skriva en kommentar.