BMS-820DMG Snabbt och starkt Digitalservo för Bil och Flyg

520.00 kr

6 i lager

Artikelnr: BMS-820DMG Kategori:




BMS-820DMG+HS High Performance

(For Car only) (MOS-FET)






<#20619>Large ALU Servo arms (For Car)


The servo designed for racing only, due to racing tough competition make servo hot even over use, the upgrade assist parts are heat sink settle down motor overuse. With a servo accessory package and is made with a heavy duty servo case, the servo is designed for R/C high performance Car applications. Double ball bearing with flexible rubber waterproof, otherwise the output spline is same with Futaba 25 tooth.


This servo comes with JR/Hitec S Connector also known as a "Universal Connector". Even thought this servo comes with JR/Hitec S Connectors, this servo is electrically compatible with Futaba receivers. Follow the wiring diagram below. If you hook this up incorrectly nothing bad will happen to the servo. Just flip the S connector and around and the servo will work correctly.


1. Metal gear

2. Double M9.6 ball bearing (si-oil)

3. 3 pole strong torque of motor with low signal affect and success get CE certification.

4. Rubber fitting case for waterproof

5. Same with Futaba 25 tooth spline

6. Geavy duty servo case

7. Middle of heat sink



45 grams / 1.60 oz.


40.5 x 20 x 37 mm /

1.60 x 0.78 x 1.52 in.

Torque At 6.0V:

8.4kg-cm , 116 oz-in

Speed At 6.0V: 0.09 sec / 60° at no load
Motor Type: Namiki 3 pole Motor
Wire Info

Brown Wire   = Battery Negative 
Red Wire     = Battery Positive 
Orange Wire  = Signal


<#20615> Large ALU Servo arms (For Airplane)

<#20619> Large ALU Servo arms (For Car)

     – Servo Application



Det finns inga produktrecensioner än.

Bli först med att recensera “BMS-820DMG Snabbt och starkt Digitalservo för Bil och Flyg”